Each request-response pair is dependent of others
Request- response is a stateless communication model
Client server architecture of Request-response uses queues
In request-response publisher is a client and broker are server.
10 KB
4 KB
64 KB
32 KB
16 MHz
12 MHZ
18 MHz
14 MHz
Damage is caused
Sensor will work fine
Sensor will not respond for the time voltage applied
Sensor will function normally
What is the output of C Program?
int main() { int k=10; while(k <= 12) { printf("%d", k); k++; } return 0; }
10 10 10
12 12 12
10 11 12
12 11 10
Java
C/C++
Python
Assembly
digitalWrite()
serial.print ( )
analogWrite()
pinMode()
AT91SAM3x8E
AT90S2313
ATmega328p
AT90S/LS8535
analogRead()
ADC
DAC
e-textiles and wearables projects
sewn to fabric
AT mega 168V/ATmega328V
All of these
0
Error
4
6
Application Programming Interface
Address Programming Interface
Accessing peripheral through the interface
None of the above
Bread Board
Shield
Actuator
Microprocessor
Icd.getcursor(0,0);
Icd.setcursor(0,0);
Icd.getcursor(0,1);
Icd.setcursor(0,1);
12
16
8
14
Digitalwrite()
Digitalread()
digitalRead()
if a voltage of 5V is applied to the pin equivalent to the A0 pin on an Arduino UNO, what is the output of the programmed below?
void setup() { Serial.begin(9600); pinMode(A0, INPUT); } void loop() { int s = analogRead(A0); Serial.println(s); }
5
1024
100
dataType const PROGMEM variableName [] = {};
data type PROFMEM const variableName [] = {};
const data Type variableName [] PROGMEM = {};
const data Type PROGMEM variableName []= {};
G++
AVR- GCC
PYTHON
Both A and B
for()
delay()