Serial communication

Qus. 1 : Which command used to print message on second line in LCD?

  1. Icd.getcursor(0,0);
  2. Icd.setcursor(0,0);
  3. Icd.grtcursor(0,1);
  4. Icd.setcursor(1,0);
Qus. 2 : Which processor helps in carrying out floating point calculations?

  1. Microprocessor
  2. Coprocessor
  3. microcontroller
  4. controller
Qus. 3 : A control system in which the control action is somehow dependent on the output is known as ______ .

  1. Closed loop system
  2. Semiclosed loop system
  3. Open system
  4. None of the above

Programs

Arduino Program to take input from serial and on the led based on input.

View Solution


Arduino program to fade the led bulb using for loop

View Solution


Arduino program to connect a led through push button

View Solution


Arduino program to change the blinking speed of led using the potentiometer

View Solution


Arduino program to print all integer number from 0 to 99 using for loop

View Solution


Arduino program to print odd numbers from 1 to 99

View Solution


Arduino program to print odd numbers from 99 to 1

View Solution


arduino program to interface buzzer with Arduino board to buzz on off with the delay of 1sec

View Solution


Arduino program to Blink a Light Emitting Diode LED

View Solution


Arduino program to print Hello word in LCD

View Solution


Arduino program to run a counter and display in LCD

View Solution


Arduino program to interface the sensor and led

View Solution


Arduino program to sound the buzzer on press on push button for 1 second

View Solution


Arduino program to interface buzzer with LDR and LED

View Solution


Arduino program to create automatic street light control by using LDR sensor

View Solution


Arduino program to read a integer number and print its table

View Solution


Arduino program to print the square root of a given number

View Solution


Design a night lamp using a LDR and a LED using Arduino Uno and find out the time delays associated in keeping ON the lamp

View Solution


Design a counter using an atmega microcontroller (like ATMEGA328P) using Arduino to display the number of entries per day in an office.

View Solution


Write a program to interface a temperature sensor (LM35) and water Nozzle with the Arduino.

View Solution


Arduino program to interface led buzzer with Arduino or raspberry pi and turn ON LED for 2 second after every 3 second

View Solution


CCC Online Test Python Programming Tutorials Best Computer Training Institute in Prayagraj (Allahabad) Online Exam Quiz O Level NIELIT Study material and Quiz Bank SSC Railway TET UPTET Question Bank career counselling in allahabad Best Website and Software Company in Allahabad Website development Company in Allahabad